3 CH Traffic Light Controller Board, Arduino Based programmable Board 6 Channel RED Green Yellow

Full optoisolation from AC line Wide input AC voltage range 100…240VAC / 50HZ and 60HZ
$44.99
$34.99
PRICE BREAKS - The more you buy, the more you save
Quantity 3+ 10+
Price $33.99 $31.99

3CH Traffic Light Controller, Arduino based programmable board
Our 3 Channel Traffic Light Controller is the perfect solution for all of your traffic signal needs. Accepting standard 120VAC and 240VAC line voltage, this controller provides 500 Watts per channel and will drive full-sized LED and incandescent traffic lights (this includes all household incandescent and LED bulbs). This board is based with the latest solid state relays. Solid state relays technology means quiet, effortless switching for many years.
Now is very simple programming all traffic lights timings with arduino software. 3 channel traffic light controller is based on arduino uno bootloader with ATMEGA328P microcontroller. USB-UART bridge is based on popular CH340G chip. It’s very help to user in programming all three lights timing. This board is already programmed with simple traffic lights demo code. Also, all others demo codes are provided below.
What need user to start working with this board?
1.Download and install CH340G USB driver
2.Download and install arduino programming software from webpage
3.Connect device to the computer via usb cable
4.And upload demo or user written sketches to the board

Device specification:
•PCB board dimension – 70mm x 100mm , color green
•PCB Board Material - 1.6 mm FR-4, with solder mask & silk screen
•Input Connector - 14-26AWG, 250VAC @ 16A screw terminals
•Output Connectors - 14-26AWG, 250VAC @ 16A screw terminals
•Safety fuse - 8A

If you need special traffic light timings, contact me and I will write arduino sketch special for you.
Min load 5W and max 500W per channel.Independent outputs channels for operating LEDs or incandescent lamps

NOT for fluorescent bulbs!!! Output voltage 5.0V and 3.3V. Maximum current - 100ma
Output RX-TX pins for 5.0V and 3.3V logic levels. Specially made for easy Bluetooth, WI-FI or any other serial protocol modules
3 channel traffic light controller is based on arduino uno bootloader with ATMEGA328P microcontroller. USB-UART bridge is based on popular CH340G chip.
Full optoisolation from AC line Wide input AC voltage range 100…240VAC / 50HZ and 60HZ




https://youtu.be/7hMyxDv9wyU


Sample Code
https://drive.google.com/open?id=1L5FXpbV15tA1YiWeLMXzIEcGCkssnyF7